Yes, the Bestop Safari Bikini Top, # B5258435-B51243, can be installed on a 2014 Jeep Wrangler Unlimited without the factory door surrounds.
However, removing the door surrounds may cause some water to leak between the door an the top when raining. The harder the rain the larger the amount of leakage you may encounter.
If water leakage does not bother you, then you can remove the door surroundings and install the top. However, if you do not want to take a chance on water leaking in,... view full answer...
The correct upper door sliders for a 1993 Jeep Wrangler with the Sunrider top are # B5178615. For the 1993 Wrangler and these door sliders, only the rear slider will open. According to our contact at Bestop, once opened all of the way, the opening will be 10 to 11 inches. view full answer...
The top edges of the Bestop 2-Piece Soft Doors for your 1999 Jeep Wrangler, like part # B5178915, are rounded. My contact at Bestop confirmed this. view full answer...
The Bestop 2-Piece Soft Doors for Jeep CJ-7 1976-1986 - Spice, part # B51778-37, are the compatible doors for your 1977 CJ-7 Wrangler. The dimensions are 40" X 30" X 4", and they weigh 34 lbs.
I have included a product description below. view full answer...
I checked with Rampage but they do not offer any dimensions of the Rampage Locking, Billet Style Fuel Tank Door and Bezel for Jeep part # RA85006. The reason for this is because it is designed to be a custom option which simply fits over the factory bezel and installs using pre-existing holes on a 1997 - 2006 Jeep Wrangler. view full answer...
I pulled the Bully chrome-plated fuel door # GD-801CK from the warehouse, and it is 7-1/8 inches across. The mounting holes are 4-7/16 inches apart on center.
I am including a diagram showing the points I measured. This fuel door is custom fit for the 1997 through 2006 Jeep Wrangler and Jeep Wrangler Unlimited. view full answer...
I spoke to my contact at Rampage and the Rampage Round Nerf Bars # RA8828 that you referenced will fill out the entire area under both of the doors on your 2015 Jeep Wrangler Unlimited. It will be under both the front and rear doors.
The picture that is used is just a typical photo to give you an idea on what the tube step will look like but it is not the actual step you will receive. view full answer...
There is a backbone system for the 2012 Jeep Wrangler Rubicon. It is the Rhino-Rack Backbone Mounting System item # RRRJKB2 for the 2-door models or item # RRRJKB1 for 4-door.
If you want to attach crossbars you will need the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2
Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - Qty 4 item # RRRLT600
Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs - Qty 4 item # RRQMFK06 view full answer...
The outer diameter on the Pop & Lock Fuel Door with BOLT Lock for Jeep Wrangler JK # PL3000 is 6.521". According to Pop and Lock, the angle is 23 degrees. view full answer...
I confirmed with Putco that the height of the Putco Black Platinum Rocker Panels - Stainless Steel - Mirror Black # P9751275BP from the bottom to the top of the door panel is 3-1/2 inches. I also confirmed that these panels will fit Jeep Grand Cherokee models from 2011-2020. I went ahead and attached a picture of the height to give you better perspective. view full answer...
In the folded position, the closest part of this bike rack will be 6 inches away from the face of the trailer hitch receiver on the Hollywood Racks SE 4 Bike Rack, # HR1400Z. If you measure from the opening of the hitch on your 2014 Jeep Wrangler out to the furthest point out on the spare tire of your 2014 Jeep Wrangler Unlimited and the distance is less than 6 inches this rack would have enough clearance to fold up. view full answer...
I spoke with my contact at Rhino Rack and he said that from the gutters of your 2013 Jeep Wrangler Unlimited up the Rhino Rack part # RRSG59 will add about 5-1/2 inches.
This rack has a weight capacity of 88 lbs. You will need to consult the owners manual of your Jeep to determine what is recommended in terms of roof capacity and be sure not to exceed this figure. view full answer...
The widest part of the MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler part # MR83MR that slides out is the top tray. The top tray measures 15-3/4" wide but that does not include the side walls. The side walls however are not very thick, around 1/16" so I would say the max width of the top tray is no more than 15-7/8" including the side walls so that is what you would need to account for in an opening. view full answer...
The Rampage Replacement Jeep Soft Top in khaki color, part # RA68736, is a confirmed fit on your 1997 Jeep TJ and according to my contact at Rampage the top's window material is 30 mils thick. view full answer...
You will need to measure to find out if you will have enough clearance for the Thule Double Track Bike Rack, part # TH990, to clear your spare tire. The distance from the hitch pin hole on the rack to the closest upright portion of the rack that could interfere with the spare tire is 11-1/2 inches.
You will want to measure 11-1/2 inches back from the pin hole on your hitch to see if that distance will clear your spare tire. view full answer...
The correct base plate for your 2022 Jeep Wrangler Rubicon is the Roadmaster Direct-Connect item # RM-521453-5. The direct connect arms are removable and will connect to your Nighthawk Tow Bar item # RM-676.
I have linked an installation video below to help you get it set up.
Since you already have the cable you will just need the following parts to connect to your Jeep's lights and control them:
Roadmaster Universal Hy-Power Diode Wiring Kit item # RM-152 or item # RM47ZR if you have... view full answer...
I spoke to my contact at Bestop and she informed me that the distance between the D-ring attachment points for the Bestop HighRock Front Bumper part # B4293301 that you referenced is 29-31/64 measured from inside to inside.
I attached an install video for this for you to check out as well. view full answer...
Yes, I can confirm the etrailer Trailer Hitch Receiver item # e98856 and the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118786 both fit your 2019 Jeep Wrangler. I have attached installation videos for both so you can follow along with the installation process.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and... view full answer...
I don't know exactly how far the Draw-Tite hitch # DT78MR is going to stick out from your bumper but I can tell you that it's exactly 6-3/8 inches from the front of the mounting plate to the opening. The mounting plate itself is right at 3/4 of an inch thick so if you measure roughly 7 inches from the frame of your Jeep out past the bumper you can see where the opening of the receiver tube will be. view full answer...
You are correct that the lowest component of the system will limit the overall weight capacity. The cargo carrier may be rated for 500 pounds, but the 350 pound tongue weight capacity of the hitch will limit the cargo carrier to 350 pounds.
One important thing to keep in mind is that your vehicle's tongue weight capacity may be lower than the tongue weight capacity of the hitch. If your vehicle has a maximum tongue weight rating lower than that of the hitch, the vehicle's tongue weight... view full answer...